Fixed Position Barcode Scanners vs Handheld Scanners in Industrial Environments
Fixed or handheld? A selection table by application, speed and code type, plus the Cognex DM290 and an FAQ.
Fixed or handheld? A selection table by application, speed and code type, plus the Cognex DM290 and an FAQ.
On a production line, barcodes and 2D codes are a product's identity: one misread or missed code can mix up batches, break traceability or stop the line. A question engineers and production managers often ask is whether to invest in fixed position barcode scanners or in handheld readers. This article compares the two by application, speed and code type, adds a quick selection table, introduces the DM290 and answers common questions.
A fixed scanner is mounted at one position on a conveyor, packaging machine or inspection station. As a product passes through the field of view, an image sensor captures the code and decodes 1D barcodes, QR codes and 2D symbols such as DataMatrix, then sends the result to a PLC or management system over an industrial protocol.
Its main strengths are automatic operation without an operator, high speed and easy connection to the line. It suits repetitive read points: packaging, automatic sorting, visual inspection stations and traceability. Real speed and read rate depend on code quality, surface, lighting and conveyor speed, so testing on real samples is essential.
A handheld scanner is a mobile device that an operator brings to the code on a product, carton, pallet or document. It uses laser or CMOS camera technology.
It offers flexibility in position and angle, is easy to use without technical skills, and usually costs less for small businesses or flexible work areas. Typical uses are warehouse management, goods in and out, manual inspection, asset and component inventory, and shipment confirmation.
Use this table for a quick choice based on application, speed and code type.
| Criterion | Fixed scanner | Handheld scanner |
|---|---|---|
| Application | Automated lines, packaging, sorting, inspection stations, per-product traceability | Warehouse, goods in/out, inventory, manual checks, bulky items or hard-to-reach positions |
| Speed / volume | Suited to high speed and high volume, reading continuously without an operator | Depends on the operator; suited to low to medium volume or on-demand reading |
| Code type | 1D, QR and DataMatrix at a fixed read point; a good fit when lighting and distance can be controlled for difficult codes (poor print, scratches, low contrast) | 1D and 2D codes in many positions and angles; the user can change angle when a code is hard to read |
| Operation | Automatic, connected to PLC/MES, needs initial installation and setup | Plug and play, little configuration |
| Main risk | Mounting position, lighting and trigger must be designed; sample testing needed | Depends on the operator; hard to guarantee every product is read |
There is no universal answer: many plants use fixed scanners at critical line points and handheld readers in the warehouse or at manual inspection areas.
The DM290 (Cognex DataMan 290) is a fixed-mount code reader in two versions: DM290 Mini-Light and DM290 Multi-Light. Notable points include:
Applications named by the manufacturer include production lines, logistics and warehousing, automotive and electronics components, and healthcare. See the DM290 product introduction for details. If you need a very compact reader, look at the Cognex DataMan 80, which has integrated illumination and single-cable power and communication over PoE or USB-C. The full range is on the barcode scanner page.
Picture an electronics component plant. At the end of the line each board carries a DataMatrix code that must be read and logged for traceability. This is a repeating read point at steady speed, so a fixed scanner is a sensible choice. The finished-goods warehouse, on the other hand, counts pallets and cartons in many locations, where handheld readers are more flexible and economical. This is a generic illustration; real results depend on each application.
BeeVision is a Cognex partner in Vietnam. BeeVision engineers take real samples (good and defective codes, under varied conditions), test reading and recommend a setup: model, lens, lighting, mounting position and connection protocol. This avoids over- or under-specifying before you buy.
A fixed scanner is mounted in one place and reads automatically as products pass; a handheld scanner is operated manually, flexible in position and angle but dependent on the operator.
When products pass a repeating read point, when speed matters, when each product must be read and logged for traceability, or when direct PLC connection is needed.
Handheld readers using a CMOS camera can read both 1D and 2D codes. For difficult codes, test real samples to choose the right model.
The DM290 targets production lines, logistics, automotive and electronics components, and healthcare, reading 1D and 2D codes on poorly printed labels or scratched surfaces.
The DM290 supports TCP/IP, PROFINET, EtherNet/IP, SLMP, CC-Link, Modbus TCP and others. Confirm with BeeVision engineers against the PLC you use.
The most reliable way is to test on real samples. BeeVision takes OK/NG samples, tests reading and recommends a setup before you invest.
Follow BeeVision on LinkedIn and YouTube for more machine vision know-how, and send samples for a POC so our engineers can test code reading on your products. Specifications come from Cognex and BeeVision product pages; please check the latest manufacturer datasheet.
How cameras guide robots in pick and place, when 2D is enough, when 3D is needed, and why hand-eye calibration decides accuracy.
When should you move from pattern matching, blob and edge tools to deep learning? A comparison, a checklist and Cognex tools for cosmetic defects.
You have decided to bring machine vision onto your line, and two quotes are sitting on your desk. One proposes an industrial smart camera mounted directly at the inspection…